Bộ phân tách PCB Samtronik SM-1200

Attentionmatters ：

*Before using this equipment, please read thismanual carefully, it will make your machine work safely.

* Under no circumstances,To avoid danger shouldnot remove the blade the protective plat .

*This unit is designed only for the board that isseparated by the V-CUT. Do not use it for other purposes.

* When operating the unit, it should not be wornin loose clothing. Long hair should be tied to avoid being caught by themachine.

Main features ：

1. The board cutting iscompleted by six blades, and the upper and lower pieces are a group to form acutting unit. They are A.B.C three groups . The whole cutting process isdivided into three stages. The A group of blades cuts the circuit board by 40%first. Then the B group is again crushed from the slot cut by the A group ofblades, and 40% of the cutting amount is completed again. Finally, the C groupcutting the 20% and repairing light, because the amount of cutting is smalleach time, the stress generated during the cutting process is reduced by morethan 80% compared with the traditional one-time cutting method, the edge of thedivided circuit board is smoothly, and the board surface is very flat.Nottwisting and no tilting.
2. Due to the multiplecutting, the cutting process is very smooth, greatly improving the positioningability of the V-CUT slot. Even if the V-CUT slot is very shallow, the V-CUTslot will not jump out from the guiding knife. The situation to avoid bad.
3. Due to the small cuttingforce of the blade, the durability of the blade is greatly improved, and theuse cost is reduced.