Bộ Nguồn DC Texio PS40-10A

The high resolution display can indicate output voltage and current and power value. Voltage and current values can be easy to set with “digit key” by selecting a digit to be changed.
● Three points preset memory function
Possible to preset three kinds of voltage and current values inside for easy reading of setting values.
● HI-R Function
This function is useful for not to discharge secondary cell, not to ungild plating and so on.
● Off timer function
Possible to turn off output automatically after a lapse of preset time.
● Controlling transient build-up current function
This function enables to control current at output on and prevents current overshoot.
● Sequence function
Stand-alone sequence operation is possible by loading maximum 1000 steps sequence program from PC into the unit through optional IF-70GU or IF-70RS interface board.
● Master slave operation
This function enable to operate plural same units in parallel up to 2400W (up to 800W for 6V series) and in series for two units.
● External analog control (PS-A type only)
The PS-A series can be controlled by external voltage or resistance for setting voltage and current values and by external contact for turning on/off output and selecting preset memory. PS-AR type dose not accommodate external analog control.
● Optional remote control interface boards
IF-70GU (GP-IB and USB), IF-71RS (RS-232C) and IF-70PS (compatible with PS series) are available.
● RS-232C standard PS-AR type
PS-AR type is included RS-232C control board. PS-AR type can connect max. 32 units and be controlled by PC. Simple and low-cost system can be provided.