Chuyên Thiết Bị / Products / Water Quality Tester / Conductivity - EC/TDS - Salinity /

TDS Mini Controller (0 to 1999 ppm) Hanna Instruments BL983319

Product Information

Manufacturer: Hanna Instruments
Model: BL983319
Warranty: 12 months

Thông tin khuyến mãi

Sản phẩm tạm thời chưa có khuyến mãi!

Yêu cầu báo giá

Categories: Conductivity - EC/TDS - Salinity, Water Quality Tester

Easy to buy

Variety mode of payment

Free shipping

For orders from 3,000,000 VND

Support 24/7

Even outside working hour

Contact Ho Chi Minh City

Tel: (028).3977.8269 / 0906.988.447

Email: sales@lidinco.com

Contact Bac Ninh, Ha Noi City

Tel: (0222).730.0180

Email: bn@lidinco.com

Other Contact:

Description
Documents

The BL983319 is a compact, panel mounted, process controller for measuring total dissolved solids (TDS) in a process stream that is within the 0 to 1999 ppm (mg/L) range. The device features a large LCD with protective cover. Users may choose from automatic or manual dosing modes. When in automatic mode the dry contact relay is activated when a reading is below the set point. The relay can be used to supply power to a dosing pump to add fertilizer to a nutrient solution in order to maintain an ideal concentration.
*The BL983319 uses a 0.65 conversion factor in which 100 μS/cm = 65 ppm.
Multicolor LED Indicator
LED changes color based on status.
Fire Retardant Casing
For additional safety the controllers outer case is made of fire resistant plastic.
Splash Resistant Cover
A clear plastic cover protects the face panel from dirt and liquids
Adjustable Dry Contact Dosing Relay
The BL983319 features a dosing relay that is activated when the reading is below a user programmable set point.
Programmable Overdose Protection
For enhanced safety the mini controller can be programmed to deactivate the dosing relay if the set point is not reached within a specified time interval. The overdosing timer is programmable from 5 to 30 minutes or disabled.
Relay Control Override
With the flick of a switch the mini controller’s relay can be disabled (Off), placed in control (Auto), or be activated for manual operation (On) which is useful for priming a dosing pump.
Multicolor LED Indicator
Multicolor LED indicator allows an operator to quickly check the status of the controller.
Green = Meter in measurement mode and reading is below the set point.
Orange/Yellow = Reading is above the set point and the relay is activated.
Blinking Red = Indicates an alarm condition such as when the maximum dosing time has been exceeded.
Fuse Protected Dosing Contacts
The relay dosing contact is rated for up to a 2A load and is fuse protected.
Labeled Termination Connections
Quick-connect terminal blocks are clearly labeled for easy connection to power, conductivity probe and relay that can be used to operate a dosing pump, valve, audible alarm, or light.
1/2″ NPT Male Threaded Amperometric Probe for Mounting In-line*
The BL983319 mini controller uses the HI7634 conductivity probe that is available with different cable lengths.
*HI7634 is not included and must be ordered separately

Xem thêm

Thông số kỹ thuật

TDS Range	0 to 1999 ppm (mg/L)
TDS Resolution	1 mg/L ppm (mg/L)
TDS Accuracy	±2% f.s.
TDS Calibration	manual, with CAL trimmer
EC/TDS Temperature Compensation	automatic from 5 to 50°C (41 to 122°F) with β =2%/oC
EC to TDS Conversion Factor	0.65
EC/TDS Dosing Relay	maximum 2A (fuse protected), 250 Vac, 30 VDC
EC/TDS Dosing Set Point	adjustable from 0 to 1999 mg/L (ppm)
Dosing Control	contact closed when measure < setpoint
Over Dosing Control	adjustable, typically from 5 to approximately 30 minutes
Power Supply	models “-0”: 12 VDC adapter (included) models “-1”: 115/230 VAC; 50/60Hz
Dimensions	83 x 53 x 99 mm (3.3 x 2.1 x 3.9’’)
Weight	models “-0”: 200 g (7.1 oz.) models “-1”: 300 g (10.6 oz.)