CCP Preamplifier with BNC Connector GRAS 26CI 1/2”

Typical applications and use

• CCP inputs
• Prepolarized microphones
• 1/2″ precision microphones
• High levels and high frequencies

Design

• The GRAS 1/2″ Preamplifier GRAS 26CI is a small, robust unit and uses a GRAS CCP power supply, e.g. GRAS 12AL. It has a very low inherent noise level, a large dynamic range and a frequency response from 1 Hz to above 200 kHz.
• Its small ceramic thick-film substrate has a very high input impedance, and is shielded by a guard ring to minimise the influence of stray capacitance and microphonic interference.
• The GRAS 26CI is provided with a built-in TEDS* chip, and can be programmed as a single unit with a microphone fitted. It is primarily intended for the low frequency microphone 46AZ but can be used with all GRAS 1/2″ prepolarized microphones and with adapters with other microphone sizes.
• It has an integrated BNC output connector. The casing is made of stainless steel for maximum strength and durability.
• * Transducer Electronic Data Sheet – as proposed by IEEE-P1451.4