• CAT IV Clamp Meter can measure the Voltage and Current in both very low and high power circuits.
• Accurate True-RMS reading of AC current or voltage with distorted waveform.
• Can measure AC and DC currents up to 2000A.
• Output terminal for connection to recorders.
|AC A||400A (True RMS)|
±1.5%rdg±3dgt [50/60Hz] ±3%rdg±4dgt [30Hz – 1kHz] 2000A (150 – 1700A) (True RMS)
±1.5%rdg±2dgt [50/60Hz] 2000A (1701 – 2000A) (True RMS)
|AC V||40/400/750V (True RMS)|
±1.5%rdg±3dgt [50/60Hz] ±2%rdg±4dgt [30Hz – 1kHz]
|DC A||400/2000A ±1.5%rdg±2dgt|
|DC V||40/400/1000V ±1%rdg±2dgt|
|Continuity buzzer||buzzer sounds below 20Ω|
|Frequency||10 – 4000Hz ±1.5%rdg±5dgt|
DC400mV against AC/DC400A
DC200mV against AC/DC2000A
|Conductor Size||Ø55mm max.|
|Safety Standard||IEC 61010-1 CAT III 600V, CAT II 1000V|
|Frequency Response||30Hz – 1kHz|
|Withstand Voltage||5550V AC for 1 minute|
|Power Source||6F22 (9V) × 1|
|Dimensions||250(L) × 105(W) × 49(D)mm|
|Accessories||7107 (Test leads)|
8201 (Output plug)
9094 (Carrying case)
6F22 × 1
|Optional||8008 (Multi-Tran) (AC only)|
7014 (Output cord)