Chuyên Thiết Bị / Products / Conveyor SMT /

Guillotine type PCB Separator Samtronik SM-620-500

Guillotine type PCB Separator Samtronik SM-620-500

Bộ phân tách PCB loại máy chém Samtronik SM-620-500

Bộ phân tách PCB loại máy chém Samtronik SM-620-500

Bộ phân tách PCB loại máy chém Samtronik SM-620-500

Bộ phân tách PCB loại máy chém Samtronik SM-620-500

Bộ phân tách PCB loại máy chém Samtronik SM-620-500

Bộ phân tách PCB loại máy chém Samtronik SM-620-500

Product Information

Manufacturer: Samtronik
Model: SM-620-500
Warranty: 12 months

Thông tin khuyến mãi

Sản phẩm tạm thời chưa có khuyến mãi!

Yêu cầu báo giá

Category: Conveyor SMT

Easy to buy

Variety mode of payment

Free shipping

For orders from 3,000,000 VND

Support 24/7

Even outside working hour

Contact Ho Chi Minh City

Tel: (028).3977.8269 / 0906.988.447

Email: sales@lidinco.com

Contact Bac Ninh, Ha Noi City

Tel: (0222).730.0180

Email: bn@lidinco.com

Other Contact:

Description

Introduction

Apply latest pneumatic design of light weight, the PCB could be separated in one time, with minimum internal stress, especially suitable to separation of precise SMD or thin board. Unlike double round
blade PCB separator, there won`t be any bow wave or micro crack generated. It uses wedge cutter to shear PCB in line, internal stress decreases to lowest point, even the sensitive SMD modules or capacitance still won`t be influenced, then potential risk on quality is minimized. Cutter blade applies SKH-11 high speed steel imported, also suitable to separate PCB without V-slot

Features

1. Bouble straight blade, highly suitable to separate SMD thin board and aluminum PCB ;
2. Guillotine type, for PCB of thickness 0.2 to 3.0mm, cutting moving distance 1 to 3mm, safe operation;
3. keep internal stress within 80-180Ue, to avoid micro crack and damage to precise components;
4. able to shear edge of V-slot, distance from the component should ≧0.3mm ;
5. shear rate is one segmentation per second, control by foot-plate pneumatic switch ;
6. with calculation function, obvious vision on productivity ;
7. shear blade group is started passively, shear line and position can be handled safely ;
8. shear not by rolling blade, no dust, no motor drive, no pollution of carbon dust ;
9. shear is not by blade friction, so there is no residue from blade ;
10. Shear Blade warranty 6000000 times, no need electricity supply, then no consumption on electric equipment;
11. Air pressure 0.4-0.6Mpa, no need to prepare specific place for the shear ;
12. Could configure moveable working shelf, can move and operate conveniently.

Technique Parameter

Model :SM-620-500
Machine Dimension L/W/H : 850mm×300mm×420mm
Blade size : Upper straight blade 520×60×6mm
Down straight blade520×38×6mm
Blade material :Imported high quality high speed steel
Board width :4-100mm is the best (small piece width, incomplete panel width)
V-cut speed :1mm-300mm/s
V-cut type :Glass fiber board, FR-4 base plate, aluminum base plate and other
single direction V-CUT products
V-CUT thickness :One third of the board thickness
Working Pressure :0.5-0.8mpa
Working Voltage :220V/110V optional
Power :10W
Machine Weight :138kg

Xem thêm