Chuyên Thiết Bị / Products / Oscilloscope / Analog Oscilloscope /

Twintex TOS-2040FG 40 MHz Analog Oscilloscope with Frequency Counter

Product Information

Manufacturer: Twintex
Model: TOS-2040FG
Warranty: 12 months

Thông tin khuyến mãi

Sản phẩm tạm thời chưa có khuyến mãi!

Yêu cầu báo giá

Easy to buy

Variety mode of payment

Free shipping

For orders from 3,000,000 VND

Support 24/7

Even outside working hour

Contact Ho Chi Minh City

Tel: (028).3977.8269 / 0906.988.447

Email: sales@lidinco.com

Contact Bac Ninh, Ha Noi City

Tel: (0222).730.0180

Email: bn@lidinco.com

Other Contact:

Description

★ Dual channel 20MHz/40MHz/50MHz

★ High sensitivity 1mV/DIV

★ 10 times sweep magnification

★ TV synchronization; X-Y mode

★ Z-axis modulation input; CH1 signal output

★ High illumination internal graticule CRT

★ Japanese encoded switch, reliable and durable

★ Fully sealed durable attenuation switch

★ ALT triggering function, enabling simultaneous observation of two independent signals

★ Trigger level lock function; Auto synchronize function

★ Built-in 6 digit frequency counter

Specficiation

Model		TOS-2020FG		TOS-2040FG		TOS-2050FG
Vertical system
Sensitivity		5mV~5V/DIV, 10 steps in 1-2-5 sequence
Sensitivity accuracy		≤3%; X5MAG: ≤5%
Verniersensitivity		1/2.5 or less than panel indicated value
Bandwidth		DC~20MHz (X5MAG: DC~7MHz)		DC~40MHz (X5MAG: DC~15MHz)		DC~50MHz (X5MAG: DC~15MHz)
AC coupling
Rise time		Approx. 17.5ns (X5MAG: Approx. 50ns)		Approx. 8.75ns (X5MAG: Approx. 25ns)		Approx. 7ns (X5MAG: Approx. 23.3ns)
Input impedance		Approx. 1MΩ//Approx. 25pF
DC balance shift		5mV~5V/DIV: ±0.5DIV
Vertical mode		CH1, CH2, DUAL (ALT/CHOP), ADD, CH2 INV
Chopping repetition frequency		Approx. 250kHz
Input coupling		AC, GND, DC
Max. Input voltage		400V peak-peak, AC frequency≤1kHz
Common mode rejection ratio		>50:1 at 50kHz sine wave (set CH1 and CH2 at same sensitivity)
CH2 INV BAL		Balanced point variation≤1DIV (referred to graticule center)
Horizontal system
Sweep time base		0.2us~0.5s/DIV, 20 steps in 1-2-5 sequence
Sweep time base accuracy		±3%, X10MAG: ±5% (20ns~50ns/DIV uncalibrated)
Vernier sweep time base		≤1/2.5 of panel indicated value
Sweep magnification		X10 (Max. sweep time base 20ns/DIV)
Position shift caused by X10MAG		Within 2DIV at CRT screen center
Linearity		±5%, X10MAG: ±10% (0.2s~1us)
Triggersystem
Trigger mode		AUTO, NORM, TV-V, TV-H
Trigger level lock		Provided
Trigger source		CH1, CH2, LINE, EXT
Trigger coupling		AC: 20Hz to full bandwidth
Polarity		“+” or “-” polarity
Sensitivity	Frequency	20Hz~2MHz	2MHz~20MHz		20MHz~40MHz		40MHz~50MHz
	CH1, CH2	1DIV	1.5DIV		2.5DIV		3DIV
	ALT	2DIV	3DIV
	EXT	200mV	800mV
	TV: Sync pulse>1DIV (EXT: 1V)
External trigger input		Input impedance: Approx. 1MΩ//Approx. 25pF Max.input voltage: 400V (DC+AC peak), AC frequency≤1kHz
X-Y mode
Sensitivity		5mV~5V/DIV, ±3%
X-axis bandwidth		DC~500kHz (-3dB)
X-Y phase error		≤3° at DC~50kHz
Output signal
CH1 signal		Min.20mV/DIV (50Ω output bandwidth 50Hz~5MHz)
Calibration signal	Waveform	Positive-going square wave
	Frequency	Approx. 1kHz
	Duty ratio	<48:52
	Output voltage	2Vpp±2%
	Output impedance	Approx. 1kΩ
Z-axis input
Sensitivity		5Vpp
Bandwidth		DC~2MHz
Input impedance		Approx. 47kΩ
Max. input voltage		30V (DC+AC peak), AC frequency≤1kHz
Frequency counter
Display		6 digits LED
Display accuracy		0.01%
CRT
Display		6″ rectangle, internal graticule, 8x10DIV (1DIV=1cm)
Phosphor		P31
Accelerating voltage		Approx. 2kV (20MHz); Approx. 12kV (40MHz)
Trace rotation		Adjustable at front panel
General
Power source		AC110V/220V±10% selectable, 50/60Hz, Max.35VA
Accessories		Power cord x1, Operation manual x1, Probe x2
Dimension		310x150x455mm
Weight		Approx.8kg

Xem thêm