Torque Measuring Flange, Dual-Range Sensor Kistler 4510B

Torque measuring flanges Type 4510B… measure torque by strain gages. The digital measuring values are transmitted contactless from rotor to stator. There are analog and digital output signals available for evaluation.

• Rated torque: 100 … 20 000 N∙m
• Ratio for second range: 1:10 or 1:5 of rated torque
• Speed ranges up to 12 000 1/min
• Accuracy class in standard measuring range: 0,2
In the extended measuring range: 0,4
• Integral speed sensor with 60 pulses/revolution
• Maintanance-free, bearingless
• Flange and hub solution
• Digital non-contact signal transmission
• Electrical control signal
• Active temperature compensation
• Calibrated RS-232C output
Options
• Second separately calibrated measuring range 1:5 or 1:10
• Frequency output

Description

Due to the design with clamping set the torque measuring flange may be mounted directly on the shaft of the loading machine. The clamping set is in the scope of delivery. Adaption on the measuring side is done by means of a flange. Measuring flanges Type 4510B… are very robust and largely unsensitive
to bending moment and transverse forces.

The optional dual range version is predestinated for applications with high peak torque and medium average operating torque. A single range torque sensor should be selected for withstanding the peak torque. For measuring the average operating torque it would therefore be oversized.

Application

• Gear box test rigs
• Wheel load simulation
• Engine test rigs