Application
- Passive component:
Impedance parameter estimation and performance analysis of capacitor, inductor, magnetic core, resistor, piezoelectric devices, transformers, chip components and network components
- Semiconductor component
Parasitic parameter test and analysis of LED driver integrated circuit
C-VDC features of varactors
Parasitic parameter analysis of transistors or integrated circuit
- Other components
Impedance assessment of printed circuit boards, relays, switches, cables, batteries
- Dielectric material
Dielectric constant and loss angle evaluation of plastics, ceramics and other materials
- Magnetic materials
Magnetic permeability and loss angle assessment of ferrite, amorphous body and other magnetic materials
- Semiconductor materials
Dielectric constant, electrical conductivity and C-V characteristics of semiconductor materials
- Liquid crystal cell
Dielectric constant, elastic constant and C-V characteristics of liquid crystal cell
Technical Parameter
Model | TH2839 | |||||
Display | 7-inch TFT LCD display 800XRGBX600 | |||||
AC Test parameters | Cp/Cs、Lp/Ls、Rp/Rs、|Z|、|Y|、R、X、G、B、θ、D、Q、Vac、Iac | |||||
DC Test parameters | Rdc、Vdc、Idc | |||||
Test Frequency | Range | 20Hz-10MHz | ||||
Highest resolution | 1mHz | |||||
Test level | AC voltage | 20Hz — 2MHz:5mV — 2Vrms2MHz — 10MHz:5mV — 1Vrms | ||||
Resolution | 100uV | |||||
AC current | 20Hz — 2MHz: 50uA—20mArms2MHz — 10MHz:50uA—10mArms | |||||
Resolution | 1uA | |||||
DC Voltage | 100mV — 2V | |||||
Resolution | 100uV | |||||
DC bias | Voltage | 0V — ± 40V | ||||
Resolution | 100uV | |||||
Current | 0mA — ± 100mA | |||||
Resolution | 1uA | |||||
DC voltage source | Voltage range | -10V — 10V | ||||
Current range | -45mA — +45mA | |||||
Output impedance | 100Ω | |||||
Test terminal configuration | Four-terminal pair | |||||
Output impedance | 100Ω | |||||
Typical measurement time(speed) | Fast: 7.7ms/timeMedium: 120ms/timeSlow: 230ms/time | |||||
Highest accuracy | 1kHz: 0.05%1MHz: 0.05%2MHz: 0.1%5MHz: 0.5%10MHz:1.0% | |||||
Cable length | 0, 1, 2, 4 meters (4 meter cable is optional) | |||||
Graph sweep | Parameters | FREQ, ACV, ACV/I, DCV/I, DC voltage source | ||||
Type | Logarithm, linearity | |||||
Sweep points | 51, 101, 201, 401 or 801 | |||||
Equivalent circuit analysis | Purchase PC software | |||||
Interface | USB HOST, USB DEVICE, LAN, HANDLER, RS232C, SCANNER, Temperature Input sensor Optional: GPIB | |||||
Warm-up time | 60 minutes | |||||
Input voltage | Optional 100-120VAC/198-242VAC, 47-63Hz | |||||
Power consumption | 80VA | |||||
Dimension(WxHxD)mm3 | 400 x 132 x 425 | |||||
Weight | 15kg |