Descriptions
The Microtest 6630 precision LCR meter provide seven frequency options (10 Hz to 1/3/5/10/20/30/50MHz), it is suitable for the LCR testes of AC signals. The measurement in a continuously changing environment can be executed stage-by-stage with the test frequency and grade, and high-speed continuous tests can be performed under different test and mode conditions. The 6630 has output impedance 25Ω/100Ω can be switched, Auto Level control(ALC) , List mode function. Comparator function and Handler BIN classification function for component good and defective product classification. It supports RS-232、GPIB、Handler、LAN、USB Host/Device.
The 6630 also supports a variety of fixtures, such as liquid dielectric material test fixture, dielectric material test fixture and magnetic material test fixture.
Specifications of LCR Meter Microtest 6630:
Test Frequency | 6630-1 | 10Hz ~ 1MHz |
6630-3 | 10Hz ~ 3MHz | |
6630-5 | 10Hz ~ 5MHz | |
6630-10 | 10Hz ~ 10MHz | |
6630-20 | 10Hz ~ 20MHz | |
6630-30 | 10Hz ~ 30MHz | |
6630-50 | 10Hz ~ 50MHz | |
Minimum Resolution | 100mHz, 6-bit Frequency Input | |
Accuracy | 7 ppm±100mHz | |
Basic Accuracy | ± 0.05% | |
AC Drive Level | Test Signal Voltage Level | 10mV – 2Vrms(Ro 100Ω) 10mV – 1Vrms(Ro 25Ω) |
Voltage Minimum Resolution | 1mV | |
Accuracy | ALC ON:6% * Voltage ± 2mV ALC OFF:10% * Voltage ± 2mV | |
Test Signal Current Level | 200µA – 20mArms | |
Current Minimum Resolution | 10µA | |
Accuracy | ALC ON:6% * Current ± 20µA ALC OFF:10% * Current ± 20µA | |
DC Drive Level | 1V (fixed) | |
Test Time (The fastest) | < 3ms | |
Output Impedance | 25Ω/100Ω, switchable (Nominal value) | |
Parameters | |Z|、|Y|、θ、X、R、G、B、L、D、Q、DCR、C、 Vdc-Idc、ESR、ε’ ε”and μr’ μr” | |
Measurement Mode | Meter mode, list mode | |
Measurement Circuit | Series/Parallel | |
Correction | Open Circuit/ Short Circuit/Load correction | |
List mode | 50 groups of Multi-steps setting (Each group contains up to 15 steps) | |
BIN | 9 | |
Comparator | ABS、ΔABS、Δ%、OFF | |
Bulit-in Storge | 100 sets LCR Meter setting documents, 50 sets list mode setting documents | |
USB Host Storage | LCR setting documents, list mode setting documents, BMP graphics | |
Interface | RS-232、GPIB、Handler、LAN、USB Host/Device | |
Power Supply | Voltage | 90V ~ 264Vac |
Frequency | 47Hz ~ 63Hz | |
Power Consumption | Low power consumption: Maximum 30W (Nominal value) | |
Display | 7.0”TFT, 800×480 color screen | |
Environment | Temperature: 10℃ ~ 40℃ Humidity: ≦80% | |
Dimension (W*H*D) | 336x147x340 mm | |
Weight | 3 kg |
Parameter Measurement Ranges:
|Z| | 0.000 mΩ – 9999.99 MΩ |
R, X | ± 0.000 mΩ – 9999.99 MΩ |
|Y| | 0.00000 uS – 999.999 kS |
G, B | ± 0.00000 uS – 999.999 kS |
θRAD | ± 0.00000 – 3.14159 |
θDEG | ± 0.000° – 180.000° |
Cs, Cp | ± 0.00000 pF – 9999.99 F |
Ls, Lp | ± 0.00 nH – 9999.99 kH |
D | 0.00000 – 9999.99 |
Q | 0.00 – 9999.99 |
Δ | ± 0.00% – 9999.99% |
Rdc | 0.00 mΩ – 99.9999 MΩ |
εr’ εr” | 0 – 100000 |
μr’ μr’” | 0 – 100000 |