Real-Time Spectrum Analyzers Aaronia V6 Plus 500XA-6 120 MHz

Frequency Range (min):  10 MHz

Frequency Range (max): 8 GHz (Basic version 6 GHz)

Real-Time Bandwidth: 80 MHz/opt. 120 MHz

Sweep speed: 300/440 GHz/s

Signal Generator: 120 MHz

I/Os: 1 Rx & 1 Tx

Real-time bandwidth Rx: Up to 245 MHz (I/Q – via 2 x USB)*

Real-time bandwidth Tx: 120 MHz (opt. 245MHz)

POI (FFT-based): Up to 97 ns

POI (I/Q-based): Up to 10 ns

Max. power Rx: +23 dBm

Max. power Tx: +20 dBm

DANL (internal pre-amp on): Typ. -170 dBm/Hz

Amplitude accuracy (typ.): Typ. +/- 0,5 dB (compensated by FIR filter)

USB streaming connection: One or two USB 3.0 (USB 3.1 Gen1; USB 3.2 Gen1)

USB bandwidth: Up to 784 MBytes/s sustained throughput to PC (dual USB 3.0)

Frequency reference accuracy: 0,5 ppm (5 ppb via OCXO option)

With GPS Disciplined Time Base: 5 ppb (optional 200 ppt)

RBW (resolution bandwidth): 62 mHz to 200 MHzMeasurement units Over: 20 (e.g. dBm, dBμV, V/m, A/m, W/m², dBμV/m, W/cm²)
Detector: Min, Max, AVG, Peak, QPeak

Attenuator range: 50 dB / 70 dB (0,5 dB steps)

Traces Over: 20 (e.g. ACT, AVG, MAX, MIN, QPEAK)

Measurement modes True IQ or Power/Frequency data

Trigger Cursor, Measurement, Density

ADC Dual: 2GSPS 16 Bit

DAC: 2GSPS 14-Bit (16-Bit via oversampling)

GPS: GPS/QZSS, GLONASS, BeiDou and Galileo (concurrent reception)

GPS synchronisation: +/- 10ns timestamping in each data packet

External Frequency Reference Input: typ. 10MHz, 3,5VRMS into 50 Ohm (SMB-connector)

FPGA: XC7A200T-2

DSP: processing 930 GMACs

SDRAM: 2 GB

RF connectors: SMA (Rx,Tx), SMB (Trigger, Refclock, GPS, PPM). All 50 Ohms.

Temperature range (operation): 0 °C to +50 °C (extended -40 to +75 °C)

Dimensions: 210 x 115 x 30 mm

Weight: 850 g

Power: USB 3.2 Gen 1 Type-C PD 3.0

Power consumption: Typical 15 W

Country of origin Germany