– 2 in 1 (DSO + Multimeter)
– Auto-scale function
– 20 automatic measurements
– Bandwidth : 20MHz – 100MHz
– USB data transmission supported
– Waveform record and replay
– Multimeter newly supported SCPI
– Rechargeable Li-ion battery (6 hours’ backup)
Specifications
Model | HDS1021M-N | HDS2061M-N | HDS3101M-N |
---|---|---|---|
Bandwidth | 20MHz | 60MHz | 100MHz |
Sample Rate (real time ) | 500MS/s | 1GS/s | |
Horizontal Scale (s/div) | 5ns/div~100s/div, step by 1~2.5~5 | 5ns/div~100s/div, step by 1~2~5 | |
Display | 3.7” color TFT display (640 × 480 pixels) | ||
Channel | single | ||
Record Length | 24K points | ||
Vertical Sensitivity | 5mV/div~5V/div (at input) | ||
Vertical Resolution (A/D) | 8 bits | ||
Trigger Type | Edge, and Video | Edge, Video, and Alternate | |
Trigger Mode | Auto, Normal, and Single | ||
Trigger Level | ±6 divisions from screen center | ||
Acquisition Mode | Sample, Peak Detect, and Average | ||
Waveform Storage | 4 waveforms | ||
Communication Interface | mini-USB,mini-RS232 | ||
Power Supply | 100V-240V AC, 50/60Hz | ||
Li-ion Battery | 7.4V, 6 hours’ operation | ||
Dimensions (W × H × D) | 115 × 180 × 40 (mm) | ||
Weight (without package) | 645.00 g |
Multimeter Specifications | |||
---|---|---|---|
Full Scale Reading | 3(3/4)digits (max 4000-count) | diode | 0V-1V |
Input Impedance | 10 MΩ | On / Off Test | < 50 (± 30) beeping |
Voltage | VDC : 400mV, 4V, 40V, 400V, 1000V : ±(1% ± 1 digit); max input : DC 1000V VAC : 4V, 40V, 400V : ±(1% ± 3 digits), 750V : ±(2% ± 3 digits); Frequency : 40Hz – 400Hz; max input : AC 750V (virtual value) | ||
Current | DC : 40mA, 400mA : ±(1.5% ± 1 digit), 10A : ±(3% ± 3 digits) AC : 40mA : ±(1.5% ± 3 digits), 400mA : ±(2% ± 1 digit), 10A : ±(5% ± 3 digits) | ||
Impedance | 400Ω : ±(1% ± 3 digits), 40ΚΩ – 4ΜΩ : ±(1% ± 1 digit), 40MΩ : ±(1.5% ± 3 digits) | ||
Capacitance | 51.2nF – 100uF : ±(3% ± 3 digits) |