Read the value clearly in the sun through half reflection LCD+ 2 in 1 (DSO + Multimeter)
+ with good ISOLATION between channels
+ The channel-to-channel isolation has a safety rating of 1000 V, CAT II
+ Auto-scale function
+ FFT function
+ 20 group automatic measurement options
+ Bandwidth: 20MHz
+ USB data transmission supported
+ Rechargeable Li-ion battery
+ Multimeter newly supported SCPI
Model | HDS1022M-I | |
---|---|---|
Bandwidth | 20MHz | |
Sample Rate | 100MS/s | |
Record Length | 6K points | |
Channel | dual, insulated ground of 1000 : 1 | |
Display | 3.7” color TFT LCD, 640 x 480 pixels | |
Horizontal Scale (s/div) | 5ns/div – 100s/div, step by 1 – 2 – 5 | |
Vertical Sensitivity | 5mV/div – 5V/div (at input ) | |
Vertical Resolution | 8 bits | |
Trigger Mode | Auto, Normal, and Single | |
Waveform Math | +, -, *, / , FFT, invert | |
Communication Interface | USB host, and USB device | |
Battery | built-in Li-ion battery, 7.4V / 3500mAh | |
Dimension (W / H / D) | 113 x 180 x 40 mm | |
Weight | 645.00 g |
Multimeter Specifications | |||
---|---|---|---|
Full Scale Reading | 3(3/4) digits (max 4000 count) | Diode | 0V – 1V |
Input Impedance | 10 MΩ | On / Off Test | < 50 (± 30) beeping |
Voltage | VDC : 400mV, 4V, 400V, 1000V : ±(1% ± 1 digit); max input : DC 1000V VAC : 4V, 40V, 400V : ±(1% ± 3 digits), Frequency : 40Hz – 400Hz; max input : AC 750V (virtual value) | ||
Current | DCA: 40mA, 400mA: ±(1.5% ±1 digit), 10A: ±(3% ± 3 digits) ACA: 40mA: ±(1.5% ± 3 digit); 400mA: ±(2 ± 1 digit); 10A: ±(3% ± 3 digits) | ||
Impedance | 400Ω: ±(1% ± 3 digits); 4KΩ / 40KΩ / 400 KΩ / 4MΩ: ±(1% ± 1 digit); 40MΩ: ±(1.50% ± 3 digits) | ||
Capacitance | 51.2nF – 100uF : ±(3% ± 3 digits) |