Measurement microphone PLACID PMP40-1B

PLACID PMP40-1B Measurement Microphone set

The PLACID PMP40-1B is a high-precision condenser microphone manufactured in compliance with the IEC 61094-4 requirements and classified as a class 2 microphone set.

Frequency Range: 20Hz to 20kHz
Dynamic Range: 30 to 126 dB(A)
Nominal Sensitivity: 50 mV/Pa

The PMP40-1B microphone set is optimized for free-field measurements and usage in microphone arrays and impedance tubes.
As all PLACID microphones, the PMP40-1B comes with an individually calibration certificate.

Basics

The PLACID PMP40-1B is a high-precision condenser microphone manufactured in compliance with the IEC 61094-4 requirements and classified as a class 2 microphone set.

The PMP40-1B microphone set is optimized for free-field measurements.
As with all PLACID microphones, the PMP40-1B comes with an individual calibration certificate.

Connectivity

The PLACID PMP40-1B microphone requires a standardized BNC preamplifier attached to a 7 mm that does not need polarization.

Uses

The PMP40-1B is a robust and stable microphone set and is being used as an all-round free-field microphone suitable for laboratory as well as field jobs. Especially designed for usage in microphone arrays and impedance tubes.

Daily usage

PLACID recommends calibration before and after each measurement with a calibrator.

Individual calibration

All PLACID microphone set are being calibrated in a controlled laboratory environment using traceable calibration equipment complying with ISO17025 standards. We recommend that all PLACID microphone set are re-calibrated every year to guarantee an optimized usage. PLACID Traceable Calibration is performed by our qualified staff and under controlled conditions according to the procedures and standards such as ISO17025.