LCR Meter UCE UC2877/2876

Brief introduction
■ High-frequency precision bridge is a multi-function component tester used to inspect various electronic components. It uses a 7-inch 800×480 color TFT LCD display, which enables users to read test results more intuitively and comfortably. It is an impedance measuring instrument with high speed, wide test range and 6-bit test resolution.
■ This instrument meets the requirements of production line quality assurance, purchase inspection and laboratory measurement. The main test products include microphones, resonators, inductors, ceramic capacitors, liquid crystal displays, varactor diodes, transformers, etc.
■  The Handler, RS232C, USB, GPIB and other interfaces provided by this instrument, as well as a complete command system, can help users easily realize the establishment of a test system.

Performance characteristics
■ Four parameter display, any combination of parameters, up to 12 measurement parameters

■   7-inch 16: 9 TFT LCD display, resolution 800×480 RGB

■ 0.05% basic measurement accuracy, up to 50 times per second test speed

■ 20Hz—5MHz test frequency, resolution 10 mHz
■ Automatic level control ALC function of test voltage or current
■ 30 Ω, 100 Ω, 50Ω, 10 /CC four different signal source output impedances
■ Built-in comparator, 10 levels Sorting and file counting function
■ Graphic scanning analysis function, support frequency/level/bias scanning, easily help you dissecting the performance of the device.
■ 10-point list sweep function,
■ Internal 0V, 1.5V, 2V DC bias voltage source
■ 2m/4m test cable extension (optional)
■ Optional ±10V (±100mA) and 1 A internal DC bias source
■ Internal 100 sets of setting files are saved or recalled, and 500 sets of test files are saved or recalled on the U disk.
■ The instrument software version can be upgraded and updated through the USB HOST. The
USB disk can support the format FAT16, FAT32 file system

■ Standard RS232C, HANDLER, USB HOST, earphone interface, optional GPIB, LAN interface