KiTorq Measuring Flange Evaluation Unit Kistler 4542A

KiTorq Stator Type 4542A… for supplying power to and
capturing measurement data from torque measuring units in
the KiTorq System, such as the Type 4550A… rotor.
• Combinations of various rotors and stators
• High precision
• Low installation height
• Fieldbus or Industrial Ethernet interface
• Freely scalable voltage and frequency output
• Cut-off frequency ≤4 kHz and IRT-capable for PROFINET Interface

Description

The KiTorq Stator Type 4542A… and KiTorq Rotor Type 455xA… make up the torque measuring flange KiTorq System. The stator supplies power to the rotor, receives and processes the measurement data, and provides different output signals. The outputs can be tared via the digital interface or by pressing a button. The outputs can be configured via the digital interface. This makes is possible, for instance, to use the output for measuring the torque with a different low-pass filter than a second torque output used for control purposes. It is also possible to convert the speed into a voltage signal. Different
scaling factors can also be applied to different plugs.

The KiTorq Stator Type 4542A… can be used together with a rotor from the KiTorq system. Using the ordering key, the stator can be purchased individually or as a calibrated torque measurement chain, together with a Type 455xA… rotor. The standard torque evaluation unit (stator) is shipped calibrated. Calibration of the entire measurement chain, consisting of the KiTorq Rotor and a KiTorq Stator, can be ordered using the rotor ordering key (such as the Type 4550A…).

Application

Applications for the KiTorq Stator are found in test bench engineering, such as electric motor, gear, pump, and combustion engine test stands. Special applications for the individual components of the KiTorq System can be found on their corresponding data sheets.