Kikusui Fuel Cell Impedance Measurement System KFM2150

• Capable of measuring impedance in the frequency range from 10 mHz to 20 kHz.
• Parallel operation by same model of PLZ-4W series enhances current capacity and power capacity.
• Power capacity:
  1000 W, 200 A, load input terminal: 1.5 V to 150 V (KFM2150 system 1000-01)
  660 W, 132 A, load input terminal: 0 V to 150 V (KFM2150 system 660-01A)
• Measuring AC current can be set from 0.1% to 10% (0.1% unit) of DC load current.
• Capable of IR measurement with the current interrupt method.
• Capable of varying DC load current while keeping measuring AC current setting (%).
• Equipped with low voltage protection
• External interface equipped as standard (RS232C, GPIB, USB)

FCTester (Application software)

• Fuel cell-friendly start-up and shut-down sequences are equipped.
• Test modes such as I-V characteristics, constant current characteristics, current interrupt method, and Cole-Cole plot by the AC impedance method are equipped.
• Capable of performing cycle test for fuel cell with a combination of sequence functions.
• 2D/3D real-time graph function is equipped.
• Capable of outputting the test data by CSV file (text format).
• Capable of observing the voltage and the current waveform of when performing the current interrupt method.
• A panel control function that is operable by PC equivalent to KFM2150’s panel operation is equipped.
• Capable of performing the impedance measurement of each cell with a combination with the FC Scanner (KFM2151).
• FC Tester consists of 3 programs, Configuration Tool, Condition Editor and Executive.