The MCR-9000 series precision LCR meter provide six frequency options (10 Hz to 1/3/5/10/20/30MHz), it is suitable for the LCR testes of AC signals. The measurement in a continuously changing environment can be executed stage-by-stage with the test frequency and grade, and high-speed continuous tests can be performed under different test and mode conditions.
Specification
Test Frequency | MCR-9005 | 10Hz ~ 5MHz |
MCR-9010 | 10Hz ~ 10MHz | |
MCR-9020 | 10Hz ~ 20MHz | |
MCR-9030 | 10Hz ~ 30MHz | |
Minimum Resolution | 100mHz, 6-bit Frequency Input | |
Accuracy | 7 ppm±100mHz | |
Basic Accuracy | ± 0.05% | |
AC Measurement | Test Signal Voltage Level | 10mV – 2Vrms |
Voltage Minimum Resolution | 1mV | |
Accuracy | ALC ON:6% * Voltage ± 2mV | |
ALC OFF:10% * Voltage ± 2mV | ||
Test Signal Current Level | 200µA – 20mArms | |
Current Minimum Resolution | 10µA | |
Accuracy | ALC ON:6% * Current ± 20µA | |
ALC OFF:10% * Current ± 20µA | ||
DC Measurement | 1V (fixed) | |
Test Time (The fastest) | < 3ms | |
Output Impedance | 25Ω/100Ω, switchable (Nominal value) | |
Parameters | |Z|、|Y|、θ、X、R、G、B、L、D、Q、DCR、C、 Vdc-Idc、ESR、ε’ ε”and μr’ μr” | |
Measurement Mode | Meter mode, list mode | |
Measurement Circuit | Series/Parallel | |
Correction | Open Circuit/ Short Circuit/Load correction | |
List mode | 50 groups of Multi-steps setting (Each group contains up to 15 steps) | |
BIN | 9 | |
Comparator | ABS、ΔABS、Δ%、OFF | |
Bulit-in Storge | 100 sets LCR Meter setting documents, 50 sets list mode setting documents | |
USB Host Storge | LCR setting documents, list mode setting documents, BMP graphics | |
Interface | RS-232、GPIB、Handler、LAN、USB Host/Device | |
Power Supply | Voltage | 90V ~ 264Vac |
Frequency | 47Hz ~ 63Hz | |
Power Consumption | Low power consumption: Maximum 30W (Nominal value) | |
Display | 7.0”TFT, 800×480 color screen | |
Environment | Temperature: 10℃ ~ 40℃ Humidity: ≦80% | |
Dimension (W*H*D) | 336x147x340 mm | |
Weight | 3 kg |