Modular Multifunction Electronic Load Kikusui PLZ150U

Descriptions

The PLZ-U Series provides a set of compact, high-performance multichannel electronic load systems capable of operating in five modes – constant current, constant resistance, constant voltage, constant current+constant voltage and constant resistance+constant voltage.

Adopting the modular (plug-in) design, the Series consists of four models – two frame models and two load unit models. The PLZ-30F frame can configure the load units up to three channels, and the PLZ-50F frame can configure up to five channels. Two load unit models are available, the PLZ- 70UA (75-watt load that operates even at 0 V) and PLZ-150U (150-watt load that operates from 1.5 V up).

Features

• Slew rate of 2.4A/μs in the rising and falling edges in CC mode (PLZ150U)
• Built-in three ranges; voltmeter, ammeter, and wattmeter functions that provide readings of up to five digits
• The current slew rate can be changed continuously in constant current and constant resistance modes
• Supports 0-V input – an indispensable feature for testing single-cell fuel cells
• Individual units (channels) can operate either independently or in synchronization
• Up to 5 load units of the same model can be operated in parallel.
• Up to three values can be stored in memory for each most frequently used operation mode and range
• Equipped with various types of protection circuits:
  Over Voltage Protection(OVP), Over Current Protection(OCP), Over
  Power Protection(OPP), Over Heat Protection(OHP), Under Voltage
  Protection(UVP), And Reverse Connection Protection(REV)
• GPIB/RS232C are standard interface
• External control is available to turn on or off the output