BATTERY POWERED SOLDERING IRON Solomon SL-089

BATTERY POWERED SOLDERING IRON
This portable soldering iron is operated by means of 3×1.5V size AA batteries.

Safety Notes

• Place the protective cover over the tip when storing such that the cover secures the slide switch in the “OFF” position.
• Tip is hot, Do not touch, Do not immerse in water!
• After using the soldering iron, cool the iron naturally before storing away.
• Always switch off the soldering iron after use by sliding the switch to the “OFF” position.

Operating Instructions

• Slide the battery cover open at the end of the soldering iron.
• Place 3×1.5V size AA alkaline batteries into the iron as illustrated and replace cover.
• Remove the protective cover at the tip.
• Make sure tip is securely installed.
• Slide the On/Off switch to the “ON” position.
• Hold the soldering iron like a pen.
• Press the round button on top of the On/Off switch continuously for approx. 15 seconds.
• The tip should reach working temperature.
• To save power, only press button when actually soldering.
• The hot soldering iron should be placed standing upright with the tip pointing up when not in use to avoid contacting the surrounding.
• After soldering , slide the switch to the “OFF” position, replace the protective cover.

Maintenance

• If it takes more than 30 seconds to reach working temperature, replace the batteries.
• Use alkaline batteries for best results. Do not mix old and new batteries.
• With 3 new batteries, this soldering iron can operate continuously for approx. 60 minutes.
• Do not change the soldering tip when hot, Use the tip exchanger provided to remove the tip as shown.
• The soldering tip is iron-plated long life tip an therefore do not file the tip.
• If the soldering iron is not to be used for a long period of time, remove the batteries from the soldering iron.

Specifications: