The characteristics of the spray system of Guangshengde energy-saving lead-free double wave soldering machine GB-N315C
● Adopt Lumina nozzle, spray range 20～65mm, fan face adjustable, nozzle height 50～80mm adjustable, maximum flow rate 60ml/min.
● Imported filters, control valves and pipe joints are used, and the air pressure is displayed digitally. The air pipes of all spray systems adopt acid and alkali resistant, corrosion-resistant SMC air pipes.
● The flux spray system adopts a scanning spray method, which adopts a combination control of a limit proximity switch and a plate-in optical eye, and automatically detects the inductive spray of the PCB according to the speed and width of the PCB. To achieve the best effect of the wetting range of the flux, Nissan nozzle and stepper motor, dedicated drive control system, accurate and reliable;
● Stainless steel is used as a tray under the nozzle, which is used to hold waste water and flux, which can be taken out and cleaned at will;
● The ventilation system is a labyrinth-type automatic recovery system, double-layer stainless steel wire mesh filtration, and the use of fluid characteristics to maximize filtration and recovery of excess flux
● Equipped with adjustable direction and air pressure air knife to blow the excess flux during spraying into the recycling box to prevent the flux from entering the preheating zone and ensure production safety.
● All stainless steel bracket, easy to clean and maintain. High level of anti-corrosion and durable.
|way to control||Computer + PLC (Guangshengde PCBASE wave soldering control software V1.0)|
|Transport motor||1P AC220V，60W|
|Transportation speed||0 ～ 2000 mm/min|
|Substrate size||30 ～ 300 mm (W)|
|Preheating zone||1300mm three-stage PID full hot air independent control, room temperature～250℃|
|Tin furnace heating||1.2KW * 9PCS Room temperature～300℃|
|Tin furnace capacity||240KG|
|Crest motor||3P AC220V,0.18KW*2PCS|
|Claw washing pump||1P AC220V 6W|
|Transport direction||Left → right|
|Welding angle||3～6 º|
|Flux air pressure||3～5 BAR|
|power supply||AC380V 50HZ|
|Normal operating power/total power||5.5KW / 21KW|