Chuyên Thiết Bị / Products / Discontinued products /

USB Matrix USB Oscilloscope/Data logger

Product Information

Manufacturer: Matrix
Model: USB Oscilloscope/Data logger
Warranly: 12 months

Thông tin khuyến mãi

Sản phẩm tạm thời chưa có khuyến mãi!

Yêu cầu báo giá

Category: Discontinued products

Easy to buy

Variety mode of payment

Free shipping

For orders from 3,000,000 VND

Support 24/7

Even outside working hour

Contact Ho Chi Minh City

Tel: (028).3977.8269 / 0906.988.447

Email: sales@lidinco.com

Contact Bac Ninh, Ha Noi City

Tel: (0222).730.0180

Email: bn@lidinco.com

Other Contact:

Description

Hand-held portable, 153(L) x 93(W) x 30(H) mm
1G/250M Maximum sampling rate, 100Mbandwidth,2 channels.
8 Bit ~ 13 Bit vertical resolution.
Open source hardware interface to support expansion modules.
USB 2.0 interface, USB powered.Comes with PWM output.
72 hours long time data logger.
Waveform recording and playback review.
Support waveform image import as the comparison reference forreal-time waveform.
Support Serial bus decoding (RS-232,RS-485/422, I²C, CAN,SPI,Lin).
Supports a variety of current clamps and other physicalvolume custom probes.
Support buffer waveform preview and mouse wheel operations.
Historical change trend statistics and analysis functions.
Pass / Fail detection.
Support spectrum analysis and frequency response curvemapping.
Support FIR Digital Filtering function.
Support UI characteristic curve mapping.

SPECIFICATIONS:

l Connector type :	2 channels with BNC sockets, 20 mm spacing.
l Vertical resolution:	8 Bit ~ 13 Bit .
l Maximum sampling rate (S/s):	250M (real time), 1G (equivalent)
l Bandwidth ( −3 dB):	100MHz
l Input coupling:	AC/DC.
l Input characteristics:	1MΩ \|\| 25pF.
l PC OS requirements:	Windows XP, Win 7, Win 8.1, Win10 (32 bit and 64 bit).
l Over-voltage protection:	±60.0v (x1), ±600.0v (x10). (DC + AC peak)
l Triggering type:	Rising/falling edge according to trigger level, Pulse width trigger.
l Triggering mode:	None, auto, normal, single.
l Pre-trigger capture:	1%~99%of capture size.
l Automatic measurements:	Maximum, minimum, average, RMS, frequency, period, positive pulse width, negative pulse width, duty cycle, rise time, peak-to-peak value.
l Frequency response mapping	Scanning the frequency, record the process frequency and magnification data, and draw the frequency response curve.
l Measurement statistical curve:	The historical trend of the automatically measured quantities can be plotted for statistics and analysis.
l Pass / Fail detection:	You can set the upper and lower limits of the measurement quantity, and perform Pass / Fail detection and fault alarm function on the measured signal.
l Deep measurement:	With this function, the waveform jump points are automatically numbered and marked, and the time difference between the two adjacent numbers is automatically displayed.
l Samples Interpolation:	Linear or sin(x)/x.
l FFT:	1024 ~ 16K points.
l FFT window function:	Rectangle, Hanning, Hamming, Blackman.
l Math:	A+B, A-B, AxB, X-Y,Invert.
l FIR Digital Filtering:	Low-pass,High-pass,Band pass,Band stop filter.
l Acquisition Modes:	Normal mode / High Resolution mode / Peak detect mode.
l Waveform recording	File format :
and playback:	Record depth:
	File size:
l Save as file:	txt, csv, excel, oscxxx, jpg.
l Comparison reference	Support waveform image import and real-time waveform comparison reference. It can import waveform pictures, set gray level and transparency, move up and down, and zoom in and out horizontally and longitudinally.
l Data logger Sampling Interval:	1 second to 1 hour.
l Data logger Record Duration:	1 minute ~ 72 hours.
l Temperature range:	Operating: 0 °C to 40 °C (20 °C to 30 °C for stated accuracy). Storage: −20 °C to +60 °C.
l Reference Output:	1K Hz, 1.5 V square wave output with 50% duty cycle. Software-configurable PWM output with adjustable frequency and duty cycle.
l Size:	153(L) x 93(W) x 23(H) mm.
l Languages (full support):	English, Chinese (simplified).
l Compliance:	CE, FCC.
l Net weight:		210 g.
l Input sensitivity (10 vertical divisions):		20 mV/div to 2 V/div.
l Input ranges( probe x1):		±100 mV to ±8 V full scale, in 7 ranges.
l Input ranges( probe x10):		±1V to ±80 V full scale, in 7 ranges.
l Timebase selection (10 horizontal divisions):		5 ns/div ~ 60 s/div, in 32 ranges.
l Typical noise (peak to peak voltage):	20 mV/div	2 mV
	50 mV/div	5.8 mV
	100 mV/div	8 mV
	200 mV/div	22 mV
	500 mV/div	38.8 mV
	1 V/div	88.2 mV
l Memory depth (byte /Ch):		64K	≤50 ms/div
		258K	200 ms/div
		645K	500 ms/div
		2M	1 s/div
		8M	2 s/div
		10M	10 s/div
		20M	20 s/div
		30M	30 s/div
		40M	40 s/div
		50M	50 s/div
		60M	60 s/div
l PC buffer:		Up to 500 frames of PC online data waveform buffer.
l Trigger type:		Hardware
l Trigger source:		Channel A
l Power consumption:		5 v \|\| (248~279) mA
l Protocols decoding:		UART/RS-232/485/422, I²C,CAN,SPI,lin
l FIR Filtering:		Band-pass, Band-stop
l Custom probes		Support two-point calibration of any current clamp on the market.