Transformer Tester UCE UC2878X-96PIN

Performance Characteristics

• ■ 7 inch 16: 9 TFT LCD display, resolution: 800×480 RGB
  ■ All the test results are shown in one page without turning to other pages
  ■ It is more convenient for U disk to directly save the test results,
  ■ Maximum test frequency is 1MHZ , resolution is 10 mHz.
  ■ Basic measurement accuracy is 0.05%，the ultra-fast test mode is increased (150 times / Sec)
  ■ Automatic level control ALC function for testing voltage or current
  ■ 30 Ω, 100 Ω, 10 /100, 10 /CC, four different signal sources’ output impedance.
  ■ Built-in comparator, 10 files sorting and file counting function
  ■ Internal 100 setting files are used to save or call, testing files of U disk are unlimitedly expanded to save or call.
  ■ Optional ±10V（±100mA） and 1 A internal DC bias source.
  ■ Software version of the instrument can be upgraded and updated by USB HOST.
  ■ U disk supports the file systems with FAT16, FAT32 format.
  ■ Standard RS232C、HANDLER、USB HOST，optional GPIB、LAN interface.

Brief Intruduction

• ■ The most popular 7-inch 800×480 color TFT LCD display is used, it is more intuitive and more comfortable for users to read test results. It is a transformer test system with high speed, high precision and high performance, which can meet the requirements of production line quality assurance, purchase inspection and laboratory measurement.

General Specifications

Technical Specifications

Measurement function
Test frequency		UC2869XB 20 Hz－200 kHz，10mHZ resolution UC2867XB 20 HZ – 300 kHZ, 10mHZ resolution UC2866XB 20 HZ – 500 kHZ, 10mHZ resolution UC2878XB 20 HZ – 1M HZ, 10mHZ resolution
Transformer test parameter		Laps ratio, lap, phase, inductance, capacitance, leakage inductance, quality factor, AC resistance, DC resistance, balance, pin short circuit; LED test
Basic measurement accuracy
LCRZ		0.05%
DCR、Laps ratio		0.1％
Equivalent circuit		Series, parallel
Math function		Absolute deviation, percentage deviation
Range method		Automatic, hold, manual selection
Trigger mode		Internal, manual, external, bus
Measurement speed（≥1kHz）		Ultra-fast speed :150 times/Sec, Fast speed: 90 times/Sec, medium speed: 12 times/Sec slow speed: 3 times/Sec
Average times		1—255
Delay time		0—60s, step :1ms
Correction function		Open circuit / short circuit / load
Test end configuration		Five ends
Display mode		Direct reading，Δ，Δ%，V/I（Measured voltage / current monitor）
Test signal
Output impedance		30 Ω, 100 Ω, 10 /100, 10 /CC
Test signal level		normal：5 mV－2 V accuracy：10%，1 mV step constant level：10 mV－1 V accuracy：5%，1 mV step
DC bias source	internal	0V，1.5V，2V，accuracy：1%
	optional	UC6802A：±10V（±100mA）DC bias current
		UC6802B：0-1A DC bias current source
Display range
|Z|, R, X		0.01m Ω — 99.9999 MΩ
DCR		0.01 mΩ — 99.9999 MΩ
Laps ratio display range		1:0.001-1000:1
|Y|, G, B		0.00001µS — 99.9999 S
C		0.00001 pF — 9.9999 F
L		0.00001 µH — 9999.99 H
D		0.00001 — 9.9999
Q		0.00001 — 9999.9
θ (DEG)		-179.999º — 179.999 º
θ (RAD)		-3.14159 — 3.14159
Others
Memory		Internal 100 groups storage, unlimited expansion for U disk
Interface		Standard RS232C, HANDLER, USB HOST, Optional GPIB, LAN interface

Instrument Accessories

• UC6801X Scanning test box
  UC26004-1 Four ends Kelvin test cable
  UC26004B Two ends test cable
  UC6801－01 Pedal start switch
  UC26016 Scanning line