Chuyên Thiết Bị / Products / Water Quality Tester / Conductivity - EC/TDS - Salinity /

Pronto EC Meter for Demineralized Water with LCD and Alarm Hanna Instruments HI983304

Product Information

Manufacturer: Hanna Instrument
Model: HI983304
Warranty: 12 months

Thông tin khuyến mãi

Sản phẩm tạm thời chưa có khuyến mãi!

Yêu cầu báo giá

Categories: Conductivity - EC/TDS - Salinity, Water Quality Tester

Easy to buy

Variety mode of payment

Free shipping

For orders from 3,000,000 VND

Support 24/7

Even outside working hour

Contact Ho Chi Minh City

Tel: (028).3977.8269 / 0906.988.447

Email: sales@lidinco.com

Contact Bac Ninh, Ha Noi City

Tel: (0222).730.0180

Email: bn@lidinco.com

Other Contact:

Description
Documents

The Pronto EC Meter HI983304 is a water resistant conductivity meter designed specifically for demineralization and deionization applications where conductivity is extremely low. With a user-selectable setpoint and visual LED alarm system, you can now measure EC with peace of mind.
User-selectable setpoint and visual LED alarm
Automatic temperature compensation
Water-resistant housing
Engineered specifically for applications using demineralized or deionized water, the HI983304 measures very low conductivity. Hanging the meter above the output of any demineralization system for continuous test measurements. The unit runs without interruption on 12V DC power supply. The built-in visual alarm will activate when any measured value differs from the set point by 1.00 µS/cm, indicating the demineralizing equipment has been exhausted. This exclusive feature will ensure maximum system efficiency with minimum investment. The splash-resistant meter housing has an IP54 rating and features a large, integrated LCD screen that can be easily read from a distance.
The meter is supplied with a HI7631 two-pole, amperometric EC probe for panel mounted mini controllers that measures with accuracy up to 19.00 µS/cm. This probe has a built-in temperature sensor for automatic temperature compensation (ATC) and has a ½” male NPT threaded connection for insertion mounting. The polyethylenimine (PEI) protective sleeve resists most aggressive chemicals. The HI7631 probe provides a rapid response and high accuracy EC measurement. When using the HI983304 in pure water applications, there is no need to clean or calibrate the EC probe.
Features at-a-glance:
Water resistant housing
The meter housing is rated IP54 meaning it has a high level of protection against particles and a fair amount of protection against water
Automatic Temperature Compensation (ATC)
Samples automatically compensated for temperature variations
User selectable setpoint and visual LED alarm
Meter will activate when EC value differs from the set point more than 1.00 µS/cm

Xem thêm

Thông số kỹ thuật

EC Range	0.00 to 19.99 µS/cm
EC Resolution	0.01 µS/cm
EC Accuracy	±2% F.S.
EC Calibration	Manual, 1 point through trimmer
EC/TDS Temperature Compensation	Automatic 5 to 50°C (41 to 122°F) with ẞ=2.4%
EC/TDS Probe	HI7631 EC/TDS probe (included)
Power Supply	12 VDC adapter (included)
Setpoint	1.00 to 5.00 µS/cm
Alarm	LED blinks when EC value is 1.00 µS/cm higher than setpoint
Dimensions	86 x 94 x 33 mm (3.4 x 3.7 x 1.3”)
Weight	150 g (5.3 oz.)
Ordering Information	HI983304 is supplied with HI7631 EC probe, calibration screwdriver, 12 VDC power adapter and instruction manual.
Notes	Note: HI983304 does not need cleaning or calibration when used in pure water applications.