Equipped Auto-Tool-Change and providing the superior cost performance
- Auto Lab replaces Eleven Auto. This model employs Auto-Tool-Change mechanism and achieves a low price, while its specification exceeds Eleven Auto. Up to 10 tools are available for automatic tool change. The standard spindle motor is made in Japan with high quality and less runout. Tool change employs the electrical function without using the air compressor. (Note: Spindle motor installed on Auto Lab 100 is not made in Japan. Air compressor required.)
Cabinet (requires assembly) is available as an optional item
- Well designed and easy to perform maintenance.
Standard camera monitoring system
- Magnify the surface of the board and display on a monitor. You can easily adjust the right position while viewing display. (Maximum useful magnification depends on the size of the screen)
Optional equipments make it even easier to process
- Vacuum table The vacuum table option employs the porous resin which holds tightly in the whole area of the surface. This stabilizes the substrate tightly without causing twisting or warpage.
|Minimum pattern width (mm)||0.1 (4 mil)|
|Minimum milling width (mm)||0.1 (4 mil)|
|Working area (X/Y/Z) (mm)||229 x 300 x 45 *7
(9.0″ x 11.8″ x 1.8″)
|Table size (X/Y) (mm)||296 x 370 (11.6″ x 14.5″)|
|Control axis||X, Y, Z|
|Control motor||Stepper Motor|
|Resolution (µm) *3||0.156 (0.00614 mil)|
|Maximum Travel Speed (mm/sec.) *1||55 (2.17″)|
|Spindle speed min-1 (rpm)
|5,000 – 62,000
DC Brushless Spindle
|Drilling (mm)||0.2 – 3.175 (8 – 125 mil)|
|Maximum drilling cycle (cycles/min.) *2||55|
|Maximum thickness of processed material (mm) *4||30 (1.18″)|
|Tool change||Automatic / 10|
|Compressed air (Mpa)||—–|
|Power consumption||100 – 240 V, 50-60 Hz, 200VA|
W x D x H (mm)
|435 x 575 x 430 (17.2″ x 23″ x 17″)
With cabinet: 500 x 580 x 450 (19.7″ x 23″ x 18″)
|Machine weight (kg)||Approx. 34 (76 lbs)
With cabinet: Approx. 44 (99 lbs)
|Interface||One USB or one RS-232C port|
|Standard equipement||Fiducial positioning camera 30x (USB)*5
10 Pieces Auto Tool Change
Software: EASY CAD, Conversion & CAM
|Options and accessories||Cabinet (requires assembly)
Ring-setter / Precision ring-setter (manual)
|Connecting Cable (RS232C / USB)
Magnifying glass 10x
Extention hose for Vacuum cleaner
*1 Optimum speed for cutting depends on tool, material of board and so on.
*2 This is a repeat count of drill’s up and down on the maximum stroke.
Optimum strokes depends on the diameter of tool.
*3 The smallest traveling figures for ordering each 3 axes movement.
They do not represent the accuracy of axis positioning.
*4 Value of the thickness of the material on the work table.
This value does not show the maximum drilling stroke.
*5 Maximum useful magnification depends on the size of the screen.
*7 z-axis stroke 50mm