Voltage, Continuity and Phase Tester with Flashlight and backlit digital Display with bargraph.
The VT30 is a voltage, continuity and phase tester with built in flashlight and backlit digital display with bar graph. The tester features a double molded IP64 housing, polarity detection with LEDs for positive and negative DC and a CAT III 600 Volt / CATIV 600 Volt safety rating. This product is complete with a one year warranty, 2 AAA batteries, protective cap, and pouch case.
Features:
- Large backlit LCD display
- AC voltage (0 to 480V) and DC voltage (0 to 690V)
- Polarity detection with LEDs for positive and negative DC
- Continuity Test with audible tone
- Phase rotation test for motors
- Two handed operation for low impedance testing
- Built-in flashlight for testing in tight areas
- Rubberized double-molded IP64 housing.
Specifications | Range |
---|---|
LCD display | 1999 counts (3-1/2 digits) with bargraph and backlight |
Resolution | 1 Volt |
AC Voltage range | 0 to 480V |
ACV frequency range | 50/60Hz |
DC Voltage range | 0 to 690V |
Accuracy | ACV ±(1.5%rdg + 5d); DCV ±(1.0%rdg + 3d) |
Range selection | Automatic |
Max measuring current | ≤1.0mA (400VAC); ≤1.5mA (690VDC) |
Response time | Updates 2-3 times/sec |
Input Impedance | 1MΩ (approx) |
Continuity test | Range 0 to 200kΩ, guaranteed on < 50kΩ; |
Overvoltage protection | 480VAC/690VDC |
Low impedance test | 12-250VAC/DC; impedance <6kΩ; |
LCD enable input voltage | >4.5V AC/DC |
Operation time: | 5s <250V AC/DC |
Power supply | 2 x “AAA” 1.5V alkaline batteries |
Battery life | Approx. 8 hours continuous use typical |
Operating Temperature | 14 to 131° F (-10 to 55° C) |
Storage Temperature | -22 to 140° F (-30 to 60° C) |
Operating Humidity | 10 to 85% RH (non-condensing) |
Dimensions | 9.4 x 3 x 1.6″(240 x 78 x 40mm) |
Weight | 9.2oz (260G) |