Chuyên Thiết Bị / Products / Water Quality Tester / Electrode & Probes /

HI9814 GroLine pH Electrode for Direct Soil and Soiless Media Hanna Instruments HI12943

Điện Cực pH HI9814 GroLine Cho Môi Trường Đất Trực Tiếp Và Không Đất - Hanna Instruments HI12943

Product Information

Manufacturer: Hanna Instrument
Model: HI12943
Warranty: 12 months

Thông tin khuyến mãi

Sản phẩm tạm thời chưa có khuyến mãi!

Yêu cầu báo giá

Category: Electrode & Probes

Easy to buy

Variety mode of payment

Free shipping

For orders from 3,000,000 VND

Support 24/7

Even outside working hour

Contact Ho Chi Minh City

Tel: (028).3977.8269 / 0906.988.447

Email: sales@lidinco.com

Contact Bac Ninh, Ha Noi City

Tel: (0222).730.0180

Email: bn@lidinco.com

Other Contact:

Description

The HI12943 is a glass body, refillable, single junction pH electrode with a quick connect DIN connector. This electrode has a triple ceramic junction in the outer reference cell and the conic pH sensing tip is made with low temperature glass. There is an integrated amplifier and built-in temperature sensor for automatically temperature compensated pH readings.
The design consideration for the HI12943 is ideal for pH measurements in soils and soil slurries. This pH electrode can also be used on soiless media including rockwool, coco and perlite. The HI12943 is designed for use with Hanna’s HI9814 GroLine portable pH/EC/TDS meter.
Triple Ceramic Junction
Low Temperature Glass
Built-in Temperature Sensor
Hanna Instruments offers a wide variety of pH electrodes that are designed for many different applications. The type of glass used for sensing pH, bulb shape, body material, type of junction, type of reference and electrolyte used are just some of the design considerations.
The HI12943 uses low temperature (LT) glass, conic bulb, glass body, triple ceramic junction, and is refillable with 3.5M KCl + AgCl.
Low Temperature Glass Formulation
The glass tip uses a special LT glass formulation with a lower resistance of approximately 50 megaohms compared to general purpose (GP) with a resistance of about 100 megaohms. As the temperature of the glass decreases when in a sample at low temperature, the resistance of the LT glass will increase approaching that of GP glass at ambient temperatures. If using GP glass, the resistance would increase above the optimum resistance for the high impedance input of a pH meter.The HI12943 is suitable to use with samples that measure from -5 to 70^oC.
Conic Bulb
The conical shaped tip design allows for penetration into solids, semi solids, and emulsions. The HI1294D is ideal for the direct measurement of pH in soils, hydroponic soiless media and soil slurries.
Glass Body
The glass of the HI12943 is resistant to many harsh chemicals and is easily cleaned. The glass body also allow for a fast transfer of heat to the internal reference electrolyte. The mV generated by the reference cell is temperature dependent. The faster the equilibrium the steadier the reference potential.
Triple Ceramic Junction
The triple ceramic junction allows a higher flow rate of electrolyte from the reference cell into the measurement sample. A typical pH electrode will have a single ceramic junction that flow rate of 15 to 20 µL/hour. The HI12943 has three ceramic junctions in contact with the sample providing for a flow rate of 40 to 50 µL/hour. The increased flow provides a greater continuity between the reference electrode and the indicating electrode.
Refillable
The HI12943 is a refillable probe. Since it is a single junction pH electrode the fill solution is the HI7071 3.5M KCl + AgCl. If using a refillable pH electrode, the fill cap should be removed prior to calibration and measurement. Removing the cap creates positive head pressure in the reference cell allowing for higher flow rate of electrolyte through the outer junction. A higher flow rate will result in a faster and more stable reading.
Quick Connect DIN Connector
The HI12943 has a quick connect DIN connector that can be used only with the HI9814 GroLine portable pH/temperature meter.

Xem thêm

Thông số kỹ thuật

Reference Cell Type	single, Ag/AgCl
Junction Type/Flow Rate	ceramic, triple / 40-50 μL/h
Refill Electrolyte	3.5M KCl + AgCl
Body Material	glass
Glass Type	low temperature (LT)
Tip / Shape	conic (12 x 12 mm)
Matching Pin	no
Max. Pressure	0.1 bar
Optimum pH Range	pH: 0 to 12
Temperature Operating Range	-5 to 70°C (23 to 158°F) – LT
Body Length/Overall Length	120 mm / 175.5 mm
Temperature Sensor	yes
Outer Diameter	12 mm
Cable	7-pole; 1 m (3.3′)
Connector Type	quick connect DIN
Amplifier	yes
Recommended Use	direct soil pH measurement, soil samples, soil solution
Notes	This probe is only compatible with the HI9814 portable pH/EC/TDS meter.