Aitelong SAT-8610 Synthetic Radio Frequency Generator

SAT-8610 is a synthetic radio frequency generator with broadband and continuous wave. The latest integrated technology is applied in it, which ingeniously solves the contradiction between bandwidth and power in the traditional power generator, making it become the most pioneering power generator with high performance in the field of wireless test.

The combination of SAT-8610 and SAT-8320, a feed-through type power meter, can compose a set of hand-held and multi-functional test system with simple operation and high test speed, especially suitable for rapid acceptance and troubleshooting of radio system in wireless base stations or repeater station, as well as device pre-selection in the laboratory or producing environment.

Basic function:

•   Double sides, high stability and adjustable output 

Meanwhile completely equal frequency signals for the two ways of the main output and aux output are provided with the main output power up to 30dBm and the power adjusting range not less than 6dB. The high purity of its frequency spectrum is especially suitable for detection of various of amplification and transmission link

•   Preset frequency

The most commonly used 10 test frequency points were preset and the specific frequency can be set according to user’s requirements. Temporary adjustment of each frequency point can be made under the monitoring of the external frequency meter

•   Ultra-broadband design

A continuous set of 300MHz～3000MHz covers the vast majority of mobile communication frequency band. Automatic uninterrupted and continuous scanning can be realized with 1 MHz as step by step within the range from 300MHz to 3000MHz by PC Frequency scanning software

•   High-performance portable design

An energy-saving user interface can significantly enhance the simple operation of instrument and maximize its running time

•   High efficiency test

No preheating or calibration process needed after start-up, and the test time is greatly shortened compared to other terminal type devices (such as network analyzer, feeder line tester, etc.).

Specification:

• Frequency range： 300MHz～3000MHz
• Frequency point resolution：1 MHz
• Continuous frequency sweep range：300 MHz to 3000 MHz
• Frequency accuracy： < + / – 20 ppm
• Frequency stability： \”+ / – 0.5 ppm / ° C
• The main output power： > 30dbm / 1 w
• The main output flatness： + / – 1 dB
• The main output stability： 0.01 dB / ° C
• The main output harmonic component： < – 40 dBc
• The main output clutter component： < – 70 dBc
• The main output sub-harmonic component：< – 80dBc
• Auxiliary output power：> – 10 dBc / 0.1 mW
• Auxiliary output flatness: + / – 1 dB
• Auxiliary output stability： 0.01 dB / ° C
• Nominal impedance：50 Ω
• Output standing wave ratio： < 1.5
• DC tolerance：50 V (the main output) / 5V output (auxiliary output)
• Internal power： lithium ion battery with high reliability
• External power supply：5V / 2A DC
• RF connector：Type N (female)
• Auxiliary output：SMA (female)
• Operating temperature：- 20 ~ +50 ° C  (relative humidity < 95%)
• Storage temperature：- 40 ~ + 70 ° C (relative humidity< 70% )
• Operating altitude： 5000 meters
• Storage altitude： 14000 meters
• ESD：> 2KV
• Dimensions：120 mm x 200 mm x 50 mm
• Weight：700g