Features:
– Frequency Range from 9 kHz up to 7.5 GHz
– -160dBm Displayed Average Noise Level
– Phase Noise -98dBc/Hz @1Gz and offset at 10KHz
– Total Amplitude Accuracy <1.5dB
– 10Hz Minimum Resolution Bandwidth (RBW)
– EMI Pre-compliance Test Kit, optional EMC test software
– Standard Pass/Fail on-site test alert ability
– Up to 7.5 GHz Tracking Generator Kit
– 10.4 inches display
Specifications:
Model | XSA1015(TG) | XSA1032(TG) | XSA1036(TG) | XSA1075(TG) |
Frequency | ||||
Range | 9kHz-1.5 GHz | 9kHz-3.2 GHz | 9kHz-3.6 GHz | 9kHz-7.5 GHz |
Resolution | 1Hz | |||
Frequency span | ||||
Range | 0 Hz,100 Hz to maximum frequency of device | |||
Accuracy | ± span /(swept points -1) | |||
Internal reference | ||||
Reference frequency | 10.000000 MHz | |||
Reference frequency accuracy | ±[(days from last calibrate × freq aging rate)+ temperature stability + initial accuracy ] | |||
Temperature stability | <2.5ppm (15℃ to 35℃) | <1ppm(15℃ to 35℃) | ||
Aging rate | <1ppm/year | |||
Readout | ||||
Marker frequency resolution | span/(the number of sweep points -1) | |||
Uncertainty | ±(freq indication × freq reference uncertainty +1%× span +10%× resolution bandwidth + Marker Frequency Resolution) | |||
Frequency counter | ||||
Resolution | 1 Hz,10 Hz,100 Hz,1 kHz | |||
Accuracy | ±(marker freq × freq reference uncertainty + counter resolution) | |||
Bandwidth | ||||
Resolution bandwidth (-3 dB) | 10Hz to 500kHz(in 1 to 10 sequence), 1MHz,3MHz | |||
Resolution filter shape factor | <5:1 nominal(Digital implement, similar to Gauss Pattern) | |||
Accuracy | <5% nominal | |||
Video bandwidth (-3 dB) | 10Hz to 3MHz |
Amplitude Specification | ||||||
---|---|---|---|---|---|---|
Amplitude and electric level | ||||||
Amplitude measurement range | DANL to +20 dBm, close the preamplifier | |||||
Reference electric level | -80 dBm to +30 dBm,0.01dBm steps | |||||
Preamplifier | 20 dB,nominal | |||||
Input attenuator range | 0~40 dB,1 dB steps | 0~50 dB,1 dB steps | ||||
Max input DC voltage | 50 VDC | |||||
Max continuous power | +30dBm,average continuous power | |||||
Displayed average noise level(DANL)Input attenuation 0 dB,1Hz resolution bandwidth | ||||||
Preamp off | 1 MHz~10 MHz -140dBm(nominated) | |||||
10 MHz~1GHz -140dBm(nominated) | ||||||
XSA1015TG:1GHz~1.5 GHz -138 dBm( nominated ) XSA1032TG:1GHz~3.2GHz -138 dBm( nominated ) XSA1036TG:1GHz~3.6 GHz -138 dBm( nominated ) XSA1075TG:1GHz~3.6GHz -138dBm( nominated );4GHz~5GHz,-133dBm( nominated ) 5GHz~6GHz,-128dBm( nominated );6GHz~7GHz-123dBm( nominated ); 7GHz~7.5GHz,-118dBm( nominated ) | ||||||
Preamp on | 1 MHz~10 MHz -160dBm(nominated) | |||||
10 MHz~1GHz -160dBm(nominated) | ||||||
XSA1015TG: 1GHz~1.5 GHz -158 dBm( nominated ) XSA1032TG: 1GHz~3.2 GHz -158 dBm( nominated ) XSA1036TG: 1GHz~3.6 GHz -158 dBm( nominated ) XSA1075TG: 1GHz~4GHz -158dBm( nominated );4GHz~5GHz -153dBm( nominated ) 5GHz~6GHz -148dBm( nominated );6GHz~7GHz -143dBm( nominated ) 7GHz~7.5GHz -138dBm( nominated ) | ||||||
Phase noise | 20 ℃ ~30 ℃,fc=1 GHz | |||||
Phase noise | <-82 dBc/Hz @10 kHz offset | <-98 dBc/Hz @10 kHz offset | ||||
<-100 dBc/Hz @100 kHz offset | ||||||
<-110 dBc/Hz @1 MHz offset | ||||||
Level display range | ||||||
Log scale coordinate | 1dB ~255dB | |||||
Linear scale coordinate | 0 to reference level | |||||
level unit | dBm, dBuW, dBpW, dBmV, dBuV, W,V | |||||
Points | 201~1001 | |||||
Number of traces | 5 | |||||
Detectors | Positive-peak, negative-peak, sample, normal, RMS | |||||
Trace functions | Clear write, Max Hold, Min Hold, View, Blank, Average | |||||
Frequency response | ||||||
20℃ ~30℃,30%~70% relative humidity, 20 dB input attenuation, reference 50 MHz | ||||||
Preamp off | ±0.8 dB; | |||||
Preamp on | ±0.9 dB; | |||||
Accuracy | ||||||
Input Attenuation Switching Uncertainty | 20℃ ~30℃, fc=50 MHz,Preamplifier Off, 20dB RF attenuation,input signal 1~40 dB ±0.5 dB | |||||
Absolute Amplitude Uncertainty | 20℃ ~30℃, fc=50 MHz,RBW=1 kHz,VBW=1 kHz,peak detector, 20 dB RF attenuation, Preamplifier Off ±0.4 dB,input signal= -20dBm Preamplifier On ±0.5 dB, input signal= -40dBm | |||||
Uncertainty | input signal range 0dbm~-50dbm | |||||
±1.5 dB | ||||||
VSWR | input 10 dB RF attenuation,1 MHz~1.5GHz | input 20 dB,1 MHz~7.5GHz | ||||
<1.5,nominal | ||||||
Distortion and spurious response | ||||||
Second harmonic distortion | fc ≥ 50 MHz,Preamp off, signal input -30 dBm, 0 dB RF attenuation, 20 ℃ to 30 ℃ | |||||
-65dbc | ||||||
Third-order intermodulation | fc ≥ 50 MHz | |||||
+2 dBm (NSA1015/NSA1032/NSA1036) +10dBm(NSA1075) | ||||||
1 dB Gain Compression | fc ≥ 50 MHz, 0 dB RF attenuation,Preamp off , 20 ℃ to 30 ℃ | |||||
+2 dBm, nominal | ||||||
Residual response | connect 50 Ω load at input port,0 dB input attenuation,20 ℃ to 30 ℃ | |||||
<-85dBm,nominated | ||||||
Input related spurious | -30 dBm signal at input mixer,20 ℃ to 30 ℃ | |||||
<-60 dBc | ||||||
Sweep time and triggering | ||||||
Span range | 100Hz≤SPAN≤3GHz 10ms to 3000s zero sweep width 1ms to 3000s | |||||
Mode | Continue, single | |||||
Trigger | Free run, video | |||||
Tracking generator | ||||||
Output frequency range | 100 kHz~1.5 GHz | 100 kHz~3.2 GHz | 100 kHz~3.6 GHz(Tracking generator) 35 MHz~3.6 GHz(Tracking generator) | 100 kHz~7.5 GHz(Tracking generator) | ||
Output power level range | -30 dBm~0 dBm , | -40 dBm~0 dBm , | ||||
Output power level resolution | 1dB | |||||
Output flatness | +/-3 dB | |||||
Maximum safe reverse level | Average total power:+30 dBm,DC : ±50 VDC | |||||
Inputs and Outputs | ||||||
Front panel RF input connector | 50 Ω,N-type female | |||||
Front panel track generator output | 50 Ω,N-type female | |||||
10 M reference input | 50 Ω,N-type female | |||||
Communication port | USB HOST, USB DEVICE, LAN, earphone port, REF and VGA | |||||
General techincal specification | ||||||
Display | TFT LCD,10.4 inches | |||||
Weight (without package) | About 5 kg | |||||
Dimension (W × H × D) | 421 × 221 × 115 (mm) | |||||
Working temperature | 0~40 ℃ | |||||
Storage temperature | -20 °C to +60 °C | |||||
Power | 100V~240V 50/60Hz |