Digital Thermometers Yokogawa TX10-02

TX10 Series offers thermocouple thermometers that support K, J, E and T type thermocouples. There are three models available: 1-channel single-function, 1-channel multi-function, and 2-channel multi-function models.

Applications of Digital Thermometers Yokogawa TX10-02:

• Temperature management in a refrigerated warehouse
• Temperature checks in equipment maintenance
• Temperature management for research and development

Features:

• Memory-in Function
  Up to ten data items can be stored. When recalled, the stored data value is displayed with its memory number.
• User calibration function
  Calibration and adjustment can be mode easily by operating the panel keys on instrument and a measurement-standard.
• Thermocouple type (K, J, E, and T) select key
• Input channel select key
  With each press, the channel switches through the sequence of “chA,” “chB,” and then “chA-chB.”
• Data hold key
  A held measured value, can be stored in the memory of an optional memory number, which is selected with the up, down keys.
• Maximum and minimum record key
  Stores the maximum and minimum values from the time the RECORD key is pressed.
• Data record key
  Stores the held measured value in memory. (Up to ten)
• Resolution select key
  With each press, resolution alternates between 0.1ºC and 1ºC. (Within the range of -200.0ºC to 199.9ºC)
• Maximum and minimum values, and stored data read key
  Every time this key is pressed, the maximum and minimum values, stored data, and the current measured data are displayed in sequence.
• Relative display select key
  Displays measured values with reference to the value obtained immediately before this key was pressed (relative value). Each press of this key can select or release the relative display.
• Simplified correction mode key
  Sets the correction value, and selects active/inactive of the simplified correction function.
• Data call-up key
  Used to select a memory number when calling up stored data. Also used to adjust the correction value for simplified correction mode.