Chuyên Thiết Bị / Products / Water Quality Tester / Electrode & Probes /

Digital PEI Body pH Electrode for Field Applications Hanna Instruments HI12300

Điện cực pH chất liệu PEI kỹ thuật số - Hana Instruments HI12300

Product Information

Manufacturer: Hanna Instrument
Model: HI12300
Warranty: 12 months

Thông tin khuyến mãi

Sản phẩm tạm thời chưa có khuyến mãi!

Yêu cầu báo giá

Category: Electrode & Probes

Easy to buy

Variety mode of payment

Free shipping

For orders from 3,000,000 VND

Support 24/7

Even outside working hour

Contact Ho Chi Minh City

Tel: (028).3977.8269 / 0906.988.447

Email: sales@lidinco.com

Contact Bac Ninh, Ha Noi City

Tel: (0222).730.0180

Email: bn@lidinco.com

Other Contact:

Description

The HI12300 is a plastic body, double junction, gel filled pH electrode with a built-in temperature sensor for temperature compensated measurements in a single probe design. This probe connects to the meter with a 3.5 mm connector. The 3.5 mm connector is proprietary to meters that use digital electrodes.
The HI12300 electrode features a built-in microchip that stores sensor type, serial number, and calibration information. It also features a single ceramic junction and the spherical pH sensing portion is made with low temperature glass. The electrode has a rugged PEI (polyetherimide) body that has the chemical resistance of a glass body in an unbreakable plastic making it ideal for field and industrial applications.
Digital Electrode with Built-In Microchip
Double Junction Reference
3.5 mm Connector
Built-In Microchip
The built-in microchip stores sensor type, serial number and calibration information including date, time, offset, slope, probe condition and buffers used. This information is automatically retrieved by edge^®once the electrode is plugged in. The ability to transfer information allows for hot swapping of probes without having to recalibrate.   All pH measurements are performed within the electrode and transferred digitally to the meter. This overcomes any noise issues associated with the traditional high impedance analog measuring system. Electrical noise can be generated from a built in temperature sensor and while working in a humid environment.
Spherical Glass Tip
The spherical shaped tip design allows for a wide area of contact with the sample. This permits a faster electrode response with a higher degree of stability. The tip uses a glass formulation that has a resistance of approximately 100 megaohms. This means that measuring conditions are optimal around ambient temperatures. Use of high or low temperature glass around ambient temperatures would not be optimal due to a long response time or a shortened lifespan of the electrode.
Double Junction Reference
A double junction electrode has an internal compartment surrounding the reference wire. Silver ions are present in the electrolyte of the internal compartment, which houses the Ag/AgCl reference wire; the electrolyte outside this compartment is silver free. The double junction design means that virtually no silver from the electrode enters the sample. This design allows measurement in applications where silver ions in the sample are undesirable or silver precipitates on the junction are likely to form.
PEI Electrode Body
The PEI (polyetherimide) electrode body is suitable for a wide range of applications and excels in field measurements due to its durability. The shielding around the spherical glass tip minimizes breakage due to accidental bumping or dropping of the electrode. The PEI plastic is a high quality plastic that is chemically resistant to many harsh chemicals.
Built-In Temperature Sensor
HI12300 features a built-in thermistor temperature sensor that is in the tip of the indicating pH electrode. A thermistor temperature sensor provides for a high accuracy temperature reading and should be as close as possible to the indicating pH electrode in order to compensate for the effect that temperature has on the membrane potential. By having an accurate reading it is possible to provide an accurate temperature compensated reading.

Xem thêm

Thông số kỹ thuật

Measurement Range	pH: 0 to 13
Reference Cell Type	double
Junction Type/Flow Rate	ceramic, single / 15-20 μL/h
Type of Electrolyte	gel
Body Material	PEI
Tip / Shape	spheric (dia: 7.5 mm)
Matching Pin	no
Max. Pressure	2 bar
Temperature Operating Range	-5 to 70°C (23 to 158°F) – LT
Body Length/Overall Length	120 mm / 163.5 mm
Temperature Sensor	yes
Outer Diameter	12 mm
Cable	1 m (3.3′)
Connector Type	3.5 mm connector
Amplifier	no
Recommended Use	field applications