Description
Walk in chamber is made up of control panel, switchboard, insulation storehouse board, forced draught blower, heater, humidifier, refrigerator.
Offer large-scale part, semi-manufactured goods, finished product, temp &humidity environment test for the manufactory, for instance; computer teminal machine, automobile part.
Features
- The appearance can use different colors or all stainless steel according to the interior design, the interior is made of SUS304#stainless steel.
- Rectangular multi-layer glass view window is used to observe the test products in the testing.The window with anti-sweat electric heater device can prevent condensation water droplets.
- Indoor installs explosion-proof light which can let people clearly observe product test condition, and it is safe to use because of the installation of non-slip aluminum plate at the bottom of the laboratory.
- The door’ s double insulated seal strip can effectively isolate internal temperature leakage.
- The pure water filter unit directly filters tap water; it is easy to use and doesn’ t need to add water manually.
- Refrigeration and dehumidification system uses imported brand compressor, with the advantages of energy saving, low noise, low energy consumption, and stable performance, and uses environmental protection refrigerant(R23, R404a).
- Controller adopts imported LCD display screen, can simultaneously display measured value and the set value, time, etc.
- Controller hasmulti-segment program, so editing and temperature and humidity can quickly and sloped control.
- The TEMI 2700 Table 7.5-inch TFT LCD display with RS-232/RS-485 communication interface, 2GB standard SD memory card can connect to Ethernet; the TEMI 880Table 5.7-inch color display with RS-232/RS-485 communication interface(select optionally under the request).
- The bottom of the machine uses the channel to weld into a mesh structure in order to increase the load-bearing, it will never deform; the bottom of the unitary testing chamber installs mobile casters and positioning goblet; the channel at the bottom of compositional testing chamber
Product meets test conditions and implementation standards
1. GJB150.5A-2009 Temperature shock test
2. GB/2423.22-2012/IEC 60068-2-14: 2009 Temperature shock test
3. GB/T 2424.13-2002 / IEC 60068-2-33: 1971 Electronic product environmental test Part 2: Test method Temperature change test guide
4. GJB360B-2009 Temperature shock test
(IEC6008-2-1-2007 Electrical electronics environmental test Part 2: Test method test A: low temperature
5. GB/T 2423.2-2008 / IEC60068-2-2-2008 / IEC60068-2-2-2: 2007 Electrical Electronic Product Environment Test Part 2: Test Method Test B: High Temperature
6. GB/T 10589-2008 Low Temperature Test Chamber Technical Conditions
7. GB/T 11158-2008 High temperature test chamber technical conditions
8. MIL-STD-883, JIS C 60068-2-14, JASO-D001, AEC-Q101 Temperature cycle test;