Led Ultrasonic Metal Detector Huate FD560

Feature

Led Ultrasonic Metal Detector Huate FD560:

★ User friendly operation such as calibration, making curves, etc.

★ All curve tools included: DAC, AVG, TCG AWS, etc.

★ Pulse repeatition frequency: 10-2000Hz precise adjust, high speed scan, no miss out.

★ High signal to noise ratio, clear and stable echo, anti-noise design, perfect for tough working conditions.

★ 12-digit AD, high speed sampling leads to better echo diagram with all details. Sensitive and can detect even tiny flaws.

★ Customer can use probe frequency 20M .

★ IP65 protection standard. protective rubber casing. damping support makes it stands in any angle.

★ Battery works continuouly 15 hours after one charge.

Specification

• Testing Range:0-10000 mm ,at steel velocity
• Material Velocity Range:100～20000 m/s
• Pulse Repetition Frequency:10-2000Hz
• Dynamic Range:≥38dB
• Linearity: Horizontal: +/-0.2%, Vertical: 2.0%(Horizontal:+/-0.2% FSW Vertical: 0.25% FSH )
• Resolving Power:>40dB (5P14)
• Sensitivity Leavings:>68dB
• Reject (suppression): 0 to 80% full screen height
• 500 independence setup, any criterion can be input freely, we can work in the scene without test block；
• Large Memory: 1000 A graph
• Testing Modes: Pulse echo, dual element and thru-transmission
• Probes Optional Types: Single Straight, Single Angle, Dual Straight, Dual Angle,Through,Creeping,Surface
• Gate Monitors: Two independent gates controllable over entire sweep range
• Display Units: Inch or millimeter
• Power Requirements: AC Mains 100-240 VAC, 50-60 Hz
• Display Delay: -20 to 3400 µs
• Probe Delay/Zero Offset : 0 to 99.99µs